Before you leave, we invite you to talk directly with our managing team to ensure you receive the most accurate technical guidance, pricing support, and customization options for your project. Our experts can quickly evaluate your requirements, recommend suitable sintered plastic filter solutions, and help you reduce sourcing risks while improving efficiency, consistency, and long-term supply stability for your industrial applications.
Need Help Selecting the Right Filter Cartridge?
Our Sales Team
Tell our sales support team your product type, micron rating, size, application, filtered medium, working temperature, pressure, and estimated quantity. We will help you match the right sintered plastic, sintered metal, or sediment filter cartridge.
Most meltblown filter cartridges are made of polypropylene (PP). The media is a mass of thermoplastic microfibers formed from molten polymer and bonded into a cylindrical depth filter. Polypropylene is also the usual material for the center core and end caps. Nylon (polyamide) and a few other polymers are used in some grades.
That answer is only a starting point for a buyer. A cartridge specified only as “PP melt blown” can still differ in fiber structure, bonding method, hardware, and gasket material. Those differences decide whether the cartridge survives your temperature, differential pressure, and process fluid. This guide covers each component so you can write a more complete specification.
How a Meltblown Filter Is Built
The Fiber Media
Meltblowing is a nonwoven manufacturing process. Polymer pellets are melted and pushed through a die with very fine orifices. High-velocity hot air stretches the molten strands into microfibers, which are collected on a core as they solidify. As the cartridge builds up, process settings change so the fibers and pore structure vary through the wall. The usual goal is a looser, more open outer region and a denser inner region.
This is the graded-density structure that most manufacturers describe. For example, Seadon Filtration describes its melt blown PP cartridges as having three zones. A pre-filtering outer layer removes coarse debris. A more compacted middle layer intercepts most particles. The innermost, tightest layer catches fine particles.
Particles are captured throughout the thickness of the wall rather than only on the surface. This is depth filtration, and it is why meltblown cartridges can hold a lot of dirt for their cost. CFC Filtration’s sediment filter cartridge range includes melt blown cartridges that use this graded-density approach.
Core, End Caps, and Gaskets
The media is only part of the assembly. A typical all-polypropylene cartridge includes:
Inner core: a perforated polypropylene tube that supports the media. Some designs are coreless.
End caps: polypropylene, either thermally bonded to the media or attached by another method. Common styles are double open end (DOE), 222, and 226.
Gaskets or O-rings: a separate elastomer, such as silicone, EPDM, Buna-N, or Viton (FKM). Manufacturers such as Global Filter list several of these options.
Buyers often overlook the gasket. The fibers, core, and end caps may all be polypropylene, but the elastomer is a different chemistry. In a solvent or high-temperature service, the gasket can be the first component to fail.
Why Polypropylene Is the Default Polymer
Polypropylene suits meltblowing well. It melts at a manageable temperature, forms fine fibers readily, and costs less than most alternatives. It also resists a broad range of acids, bases, and salts. Some manufacturers add that their cartridges use no binders, adhesives, or surfactants. Hydrodex, for instance, states that its thermally bonded construction uses no adhesives, binders, lubricants, or anti-static agents.
Polypropylene also has limits:
Temperature. Published maximums vary by manufacturer and grade. Hydrodex lists 185°F (85°C), and Global Filter lists 176°F (80°C) for its high-rigidity grade. The rated differential pressure also drops as temperature rises, so a single maximum figure is never enough.
Chemical compatibility. Wide compatibility does not mean universal compatibility. Strong oxidizers and some hydrocarbon or aromatic solvents can degrade or swell polypropylene, especially when warm. Check the actual process fluid, concentration, and temperature.
Structural strength. Soft, low-rigidity media can compress or unload particles under high differential pressure or with viscous fluids. Some manufacturers offer higher-rigidity grades for this reason.
When a Different Polymer Is Worth Considering
Polypropylene is not the only option. Darlly Filtration, for example, lists a melt blown cartridge made from 100% polyamide 6 (nylon). It is positioned for solvents, paints and coatings, and higher-temperature fluids, and its published maximum is 120°C.
Consideration
Polypropylene (PP)
Nylon (PA)
Typical role
General sediment and process water prefiltration
Solvent, coating, or hotter-fluid service
Cost
Generally lower
Generally higher
Temperature capability
Lower; confirm per product
Higher in published examples; confirm per product
Chemical profile
Strong with many acids, bases, and salts
Different profile; may be better with some solvents, and more sensitive to some acids and oxidizers
Moisture behavior
Low moisture absorption
Absorbs more moisture, which can affect dimensions and strength
Availability
Very common
Less common; often made to order
Neither material is better in every case. The right choice depends on the fluid, the temperature, and the pressure profile. These figures come from individual manufacturer documents. They are not universal material limits, and they are not CFC Filtration product ratings.
What the Material Alone Does Not Tell You
Polypropylene fibers can produce very different cartridges. Four factors matter beyond the polymer name.
Micron rating basis. A meltblown cartridge is usually nominal rated, meaning a stated percentage of particles at or above a given size is retained. The percentage and test method differ between manufacturers. One datasheet may define its rating at 90% efficiency, while another uses a different method. A nominal 5-micron rating does not mean every 5-micron particle is captured. Do not compare cartridges from different suppliers on the micron number alone.
Bonding and fiber release. Thermally bonded media without binders or adhesives avoids a separate chemical from entering the fluid. Some manufacturers also glaze the inner and outer surfaces to reduce fiber shedding. If downstream cleanliness matters, ask how the media is bonded and finished.
Surface finish. Smooth, grooved, orange-peel, and fuzzy finishes are offered by some manufacturers. They change the outer surface area and how the cartridge loads. The finish is not a different material.
Compliance documentation. Polypropylene is not automatically suitable for food, beverage, or drinking water contact. Compliance depends on the resin, additives, process, and the documentation behind the specific product. If your process requires it, ask for written material declarations or certificates for the exact cartridge.
Specification Checklist for Buyers
When you request a quote for melt blown cartridges, include:
Media material. PP, nylon, or another polymer. Confirm whether the cartridge is all-polypropylene, including core and end caps.
Micron rating and rating basis. State whether you expect nominal or absolute rating and any efficiency requirement.
Core and end cap design. Cored or coreless, DOE, 222, or 226, flat, fin, or spring.
Gasket material. Match the elastomer to the fluid and temperature, not only the cartridge body.
Dimensions. Outer diameter, inner diameter, and length. Existing housings often limit the options.
Operating conditions. Fluid composition, temperature, flow rate, working pressure, and maximum allowable differential pressure.
Documentation needs. Material declarations, food-contact or drinking-water compliance, and traceability, if required.
A short process description, a drawing, or a sample of the cartridge you are replacing speeds up evaluation considerably.
Frequently Asked Questions
Is a meltblown filter the same as a polypropylene filter?
Not exactly. “Meltblown” describes how the fibers are made. “Polypropylene” describes the polymer. Most meltblown cartridges are polypropylene, but nylon and other polymers can also be meltblown. Meltblowing is also not the only way to make a polypropylene cartridge. Pleated polypropylene media and sintered polypropylene are separate constructions.
Do meltblown filters contain glue or binders?
It depends on the product. Many manufacturers describe cartridges that are thermally bonded and use no adhesives or binders. Others, such as resin-bonded cartridges, use a different construction. If a binder-free design matters for your process, ask the supplier to confirm it in writing.
Are meltblown cartridges washable or reusable?
They are generally considered disposable depth filters. Captured solids are held within the fiber structure, so cleaning is rarely complete. Some manufacturers say their cartridges can be cleaned for reuse, but results depend on the contaminant and may change the effective retention. For critical applications, treat reuse as something to test, not assume.
What is the difference between meltblown and string wound filters?
A meltblown cartridge is made of extruded polymer microfibers formed into a graded-density structure. A string wound cartridge is built by winding yarn around a core. The two differ in pore structure, retention characteristics, and cost. The better choice depends on the fluid and on how tightly you need to control retention.
Can a meltblown filter remove dissolved contaminants?
No. A particle-retention depth filter removes suspended solids such as sand, rust, silt, and scale. It does not remove dissolved salts, metals, or chemicals. Those require other treatment steps, such as adsorption, ion exchange, or membrane processes.
What temperature can a meltblown filter handle?
There is no single answer. Published polypropylene examples fall in the 80–85°C range, and a nylon example is listed at 120°C. Each depends on the manufacturer, the grade, the differential pressure, and the gasket material. Confirm the limit for your exact cartridge at your operating pressure.
Conclusion
A meltblown filter is typically polypropylene microfibers thermally bonded into a graded-density depth filter. It usually has a polypropylene core and end caps and an elastomer gasket. The polymer name tells you only part of what matters. The rating basis, bonding method, hardware, gasket, and operating limits determine whether a cartridge performs in your system. Specify all of them.